Maren Balers have been the industry standard in the box, printing, and process industries for a long time. However, the Maren ProPAK-A SERIES takes that standard to an even higher level. These balers are specifically designed to handle the demanding duty cycles required in corrugated box, folding carton, printing, converting, envelope, and tissue industries. If you operate a high-volume business and factors such as bale weight, uptime, durability, safety, serviceability, and cleanliness keep you awake at night, the Maren ProPAK A160W is worth your attention.
The ProPAK A160W are available with multiple horsepower options and various hopper sizes, making them suitable for virtually any production requirement. They come with a 42.5" width feed opening, either a 48" or 64" length feed opening, and a 40" depth feed opening. The main cylinder has a diameter of 7" and operates at a pressure of 4200 PSI, generating a ram force of 161,635 lbs and a baling force of 89.8 PSI.
The ProPAK A160W balers have single 20/30/40/60 horsepower options, as well as a twin 20/30 horsepower option. With a no-load cycle time ranging from 9.5 seconds to 21 seconds and a no-load displacement of up to 20,846 cf/hr, these balers can produce bales measuring 45 x 40 x variable length with a typical bale density of OCC up to 30#/cf.
FEATURES
“A” Frame single cylinder tension chamber takes advantage of maximum ram force during full pressure baling.
Bale sizes 45″ x 40″ x Variable length, with weights up to 2,500 lbs.
Hopper sizes to adapt to any conveyor, shredder,cart tipper or air conveying system.
Advanced automatic 5-wire bale tier with electrically driven inserter and twister.
Optional bulk wire feed system for #1,000 lb. – 1,500 lb. stump wire carrier.
Optional easy lifting electric hoist wire loading boom.
Advanced progressive shear blade design with 30″ penetration reduces shear jams and utilizes maximum ram pressure for compaction. Maren shear blades are a replaceable double edge design on both chassis and Ram and made of hardened and ground tool steel.
Baler chassis, ram and key components are fabricated using interlocking construction. This construction technique results in stronger longer lasting weldments where interlocked steel plate absorbs much of the stress that on traditional balers would be placed on the welds alone.
High strength steel plate floor is further reinforced with a replaceable AR400 abrasion resistant wear liner for ultimate durability, and virtually limitless service life.
Sealed tight and serviceable, the main ram is guided and sealed on bottom and sides by long wearing NylOil wear plates. The top of the ram is sealed tight with a spring loaded AR400 scraper. This provides unparalleled sealing and prevention of material migration behind the ram.
Chassis service door for easy access ahead and behind main ram. Door is electronically interlocked and can be padlocked to provide secure access only by maintenance personnel.
Maren’s exclusive key lock main cylinder mount removes main cylinder tension from bolts while allowing easy services and maximum cylinder mount durability.