Maren Balers have been the go-to for the box, printing, and process industries for a long time. The Maren ProPAK-A SERIES takes this standard to a higher level. These balers are specially designed for the tough duty cycle required in industries such as corrugated box, folding carton, printing, converting, envelope, and tissue. If you operate a high volume production facility and worry about bale weight, up-time, durability, safety, serviceability, and cleanliness, you should consider the Maren ProPAK A210W.
With multiple horsepower options and several hopper sizes to choose from, the ProPAK A210W can meet almost any production requirement. The feed opening width is 42.5", and the feed opening length can be 48", 64", or 80". The feed opening depth is 40", and the main cylinder is 8". The operating pressure is 4200 PSI, and the ram force is 211,115 lbs. The baling force is 117.3 PSI. The available horsepower options are Single 20/30/40/60 and Twin 20/30. The no-load cycle time ranges from 14 to 31.5 seconds, and the no-load displacement is up to 18,159 cf/hr. The bale size is 45 x 40 x Variable Length, and the typical bale density is OCC up to 32#/cf.
“A” Frame single cylinder tension chamber takes advantage of maximum ram force during full pressure baling.
Bale sizes 45″ x 40″ x Variable length, with weights up to 2,500 lbs.
Hopper sizes to adapt to any conveyor, shredder,cart tipper or air conveying system.
Advanced automatic 5-wire bale tier with electrically driven inserter and twister.
Optional bulk wire feed system for #1,000 lb. – 1,500 lb. stump wire carrier.
Optional easy lifting electric hoist wire loading boom.
Advanced progressive shear blade design with 30″ penetration reduces shear jams and utilizes maximum ram pressure for compaction. Maren shear blades are a replaceable double edge design on both chassis and Ram and made of hardened and ground tool steel.
Baler chassis, ram and key components are fabricated using interlocking construction. This construction technique results in stronger longer lasting weldments where interlocked steel plate absorbs much of the stress that on traditional balers would be placed on the welds alone.
High strength steel plate floor is further reinforced with a replaceable AR400 abrasion resistant wear liner for ultimate durability, and virtually limitless service life.
Sealed tight and serviceable, the main ram is guided and sealed on bottom and sides by long wearing NylOil wear plates. The top of the ram is sealed tight with a spring loaded AR400 scraper. This provides unparalleled sealing and prevention of material migration behind the ram.
Chassis service door for easy access ahead and behind main ram. Door is electronically interlocked and can be padlocked to provide secure access only by maintenance personnel.
Maren’s exclusive key lock main cylinder mount removes main cylinder tension from bolts while allowing easy services and maximum cylinder mount durability.