Maren Balers have long been recognized as the industry standard in the box, printing, and process industries. The Maren ProPAK-A SERIES takes this standard to new heights by offering balers specifically designed for the challenging duty cycle required in the corrugated box, folding carton, printing, converting, envelope, and tissue industries. If you operate a high-volume facility and are concerned about bale weight, uptime, durability, safety, serviceability, and cleanliness, consider the Maren ProPAK A265.
With various horsepower options and multiple hopper sizes to choose from, the ProPAK A265 can meet virtually any production requirements. The feed opening has a width of 39.5" or 42.5", a length of 48", 64", or 80", and a depth of 42". The main cylinder is 9", and the operating pressure is 4200 PSI. The ram force is 267,192 lbs, and the baling force is 141 PSI for 45" wide or 151 PSI for 42" wide. The ProPAK A265 comes with twin 30's horsepower options and a no-load cycle time of 15 secs to 20.4 secs. The no-load displacement is up to 14,400 cf/hr, and the bale size is either 42 x 42 x variable or 45 x 42 x variable. The typical bale density for OCC is 33#/cf.
FEATURES
“A” Frame single cylinder tension chamber takes advantage of maximum ram force during full pressure baling.
Bale sizes 45″w x 42″h x variable length, with weights up to 3000 lbs.
Hopper sizes to adapt with any air conveying system
Advanced automatic 6-wire bale tier with electrically driven inserter and twister.
Optional 1000# bulk wire feed system.
Optional easy lifting electric hoist wire loading boom.
Advanced progressive shear blade design with 30″ penetration reduces shear jams and utilizes maximum ram pressure for compaction. Maren shear blade is a replaceable double edge design made of hardened and ground tool steel.
Interlocking baler chassis and ram is constructed of high strength plate steel, significantly increasing the strength of welded joints.
High strength steel plate floor is further reinforced with a replaceable AR400 abrasion resistant wear plate for ultimate durability, and virtually limitless service life.
Sealed tight and serviceable, the main ram is guided and sealed on bottom and sides by long wearing NylOil wear plates. The top of the ram is sealed tight with a spring loaded AR400 scraper. This provides unparalleled sealing and prevention of material migration behind the ram.
Chassis service door for easy access ahead and behind main ram. Door is electronically interlocked and can be padlocked to provide secure access only by maintenance personnel.
Maren’s exclusive key lock main cylinder mount removes main cylinder tension from bolts while allowing easy services and maximum cylinder mount durability.
