For years, Maren Balers have been widely recognized as the benchmark in the box, printing, and process industries. However, with the introduction of the Maren ProPAK-A SERIES, this benchmark has been raised to an even higher level.
The ProPAK-A SERIES balers are specifically designed to handle the demanding duty cycles required in industries such as corrugated box, folding carton, printing, converting, envelope, and tissue. If you run a high-volume operation and factors such as bale weight, uptime, durability, safety, serviceability, and cleanliness keep you awake at night, then the Maren ProPAK A160 is definitely worth your consideration.
The ProPAK A160 are available in multiple horsepower options and several hopper sizes to meet virtually any production requirements. They feature a 27.5" width feed opening, a 30" or 40" length feed opening, and a 40" depth feed opening. The main cylinder has a diameter of 7" and operates at a pressure of 4200 PSI, generating a ram force of 161,635 lbs and a baling force of 134.7 PSI.
The ProPAK A160 has a single 20/30 horsepower option, as well as a twin 20/30 horsepower option. With a no-load cycle time ranging from 7.7 seconds to 16 seconds and a no-load displacement of up to 18,700 cf/hr, these balers are capable of producing bales with a size of 30 x 40 x variable length and a typical bale density of OCC up to 30#/cf.
FEATURES
“A” Frame single cylinder tension chamber takes advantage of maximum ram force during full pressure baling.
Bale sizes 30″ x 40″ x variable length, with weights up to 1750 lbs.
Hopper sizes to adapt with any air conveying system
Advanced automatic 5-wire bale tier with electrically driven inserter and twister.
Optional 1000# bulk wire feed system.
Optional easy lifting electric hoist wire loading boom.
Advanced progressive shear blade design with 30″ penetration reduces shear jams and utilizes maximum ram pressure for compaction. Maren shear blade is a replaceable double edge design made of hardened and ground tool steel.
Interlocking baler chassis and ram is constructed of high strength plate steel, significantly increasing the strength of welded joints.
High strength steel plate floor is further reinforced with a replaceable AR400 abrasion resistant wear plate for ultimate durability, and virtually limitless service life.
Sealed tight and serviceable, the main ram is guided and sealed on bottom and sides by long wearing NylOil wear plates. The top of the ram is sealed tight with a spring loaded AR400 scraper. This provides unparalleled sealing and prevention of material migration behind the ram.
Chassis service door for easy access ahead and behind main ram. Door is electronically interlocked and can be padlocked to provide secure access only by maintenance personnel.
Maren’s exclusive key lock main cylinder mount removes main cylinder tension from bolts while allowing easy services and maximum cylinder mount durability.