Marathon Equipment logo

Marathon Closed Door Balers

H-West Equipment, Inc. is proud to be an authorized sales & service provider of the following models. Our knowledgeable and experienced staff will be able to answer any questions, discuss financing options, and consult with you on how these products may be able to meet the needs of your facility. Contact us today at (714) 289-7733, or fill the contact form to the right, and one of our equipment specialists will be happy to provide you with excellent service right away.

ATLAS ET

marathon atlas-horizontal-baler_0

Our ATLAS® ET offers affordable, highly efficient, mid-size horizontal balers for non-ferrous scrap. With heavy-duty and stress-engineered construction, the Atlas offers a superior size to weight ratio to meet the demands of scrap baling applications. The specially designed bolt-on and replaceable body and ram shear blades provide optimum performance and ease of maintenance which eliminates precutting of most materials.

The ATLAS® ET (Extra Tough) features 400F liners and S-7 hardened steel ram and body shear blades for even tougher application requirements!

Facilities baling from one to three tons of aluminum and steel cans, aluminum and copper wire, aluminum siding, extrusion, and radiators are reaping big benefits from the ATLAS Non-Ferrous Baler.

Standard Features and Benefits
• Heavy construction – perfect for the scrap industry.
• The ATLAS® ET features stress-engineered construction for a superior size to weight ratio.
• Vertical tie-off – allows for baling without pre-processing – with 6 tie positions.
• Wire guides for quick and easy ties – tie through the bale chamber door.
• 3-sided feed hopper.
• Produces a 48-inch x 60-inch x 30-inch (1219mm x 1524mm x 762mm) size bale.
• The programmable UL® Listed controller permits automatic or manual cycling.
• The full penetration ram provides maximum compaction and full ejection.
• Dual interlock on the bale chamber door.

Questions? Contact H-West Equipment at (714) 289-7733 Today!

Closed-End Horizontal Balers

marathon closed-end-horizontal-baler-red

Closed-End Horizontal Balers are ideal for multi-material processing. The ram packs the material in the compaction chamber and the bale is ejected through the end. The gate operates hydraulically. Closed-End Horizontal Balers are mid-sized, closed-end balers that processes a wide variety of material and can produce up to 20 tons of OCC in a typical day’s shift. Several models are available with bale sizes from 30″ x 42″ x 72″ to 48″ x 42″ x 72″, charge box opening lengths from 30″ to 50″, motors with 20 & 30 horsepower, and 7-inch and 8-inch cylinder bores.

Features

  • Rotary bale length gauge activates the bale made light automatically with no flag pole to engage or disengage
  • A photoelectric cell facilitates automatic cycling
  • Heavy-duty, spring-loaded retainer locks
  • Reversible and replaceable ram shear blade and serrated body shear blade
  • Chute or hand-feed hopper
  • Heavy-duty power pack with 20 or 30 HP TEFC motor
  • Center position valve, 10-micron return line filter, and 100 mesh suction line strainer
  • Audio/visual start-up alarm

Optional Features:

  • Tongue & Groove Floor/Ram
  • Conveyor Control Options
  • Accessory Control Option
  • Material Selector Switch
  • Remote Control Station
  • Remote Power Pack
  • Oil Cooler (20 hp)
  • Immersion Oil Heater
  • Oil Temperature Shut Down
  • Low Oil Shut Down
  • Sonic Sensor
  • Upper Photo Cell
  • Custom Designed Hopper
Questions? Contact H-West Equipment at (714) 289-7733 Today!

Gemini 3560 and Gemini Xtreme Balers

marathon closed-end-horizontal-baler-gemini-3560

The Gemini 3560® and Gemini-Xtreme® Balers are moderate duty, closed-end horizontal balers that enable you to process a variety of material such as PET, aluminum or steel cans, paper, plastics, OCC, newsprint, and similar material. Because bales are tied vertically, no fluffing or preconditioning is required.

Standard Features and Benefits

  • Hydraulic Bale Door Release
  • Full penetration ram for maximum compaction and full bale ejection
  • Reversible and adjustable bolt-in shear blade (Gemini-Xtreme only)
  • Twin cross cylinders with 20 HP motor
  • 34-second cycle time
  • Wire guides for quick and easy ties
  • Hopper access door with interlock and viewing port
  • Nylon runners for smooth ram operation
  • Totally enclosed, fan cooled (TEFC) motor for worry-free operation

Optional Features

  • Above Floor Conveyor (includes variable frequency drive & hopper extension)
  • Pit Conveyor (includes variable frequency drive, pit plates, and hopper extension)
  • Oil Heater & Oil Cooler
Questions? Contact H-West Equipment at (714) 289-7733 Today!

Side-Eject Horizontal Balers

marathon-side-eject-baler-indoors

This horizontal baler is designed for applications requiring multi-material capability, and medium throughput capacity where space is limited. The Side-Eject Baler ejects the bale perpendicular to the baler utilizing the patented Bale Server Island. The server island fully ejects the bale and positions it to be easily picked up by a forklift or pallet jack.

Standard Features and Benefits

  • Increased product value by eliminating contamination between bales as the operator changes materials being processed.
  • Maximum bale weights with Marathon’s Bale Made Indicator, which signals the bale is finished. No time consuming “flag pole” or manual measuring device to compromise bale quality.
  • Marathon’s exclusive front bale tie-off system allows the operator to quickly direct tie wires around the bale from the front of the baler. this eliminates the need to go behind the baler and loosen hanging wires that drag as a bale is made.
  • Eliminates spillage commonly found with conventional balers. no need to “double handle” materials being processed.
  • Remove each bale from the bale chamber quickly and easily with Marathon’s patented Side-eject feature and Bale Server island. Unlike conventional balers that require an operator and forklift to free the bale from the end of the bale chamber, Marathon’s Side-eject design provides consistent and complete bale ejection every time

Marathon’s Patented Automatic Side Ejection Features Seamless Push Button Operation

  • Pressure is relieved from the bale in three directions to achieve positive and complete bale ejection from the chamber.
  • This advanced method of bale ejection begins by activating the “Home” button, which causes the platen to retract to a pre-set location relieving the end force on the bale. The operator then opens the chamber door, which relieves side force and automatically unlocks the hinged upper section of the chamber to relieve vertical force on the bale.
  • With pressure on the bale effectively relieved from all directions, a hydraulic powered Server island, located on the floor of the bale chamber, quickly and completely pushes the bale out of the chamber. The Server island functions as a pallet, eliminating costly construction of permanent guide islands. After the bale is removed with a forklift or pallet jack, the Server island is retracted– saving valuable space.
Questions? Contact H-West Equipment at (714) 289-7733 Today!

STEALTH Horizontal Baler

marathon stealth-horizontal-baler-outside

Marathon’s Stealth manual-tie horizontal baler is specifically designed for baling OCC and similar material with proven productivity for the recycling market.  The Stealth is capable of baling 2-3 tons of OCC per hour.

Features

  • 46-inch wide by 60-inch long feed opening
  • “Hand feed” type hopper standard
  • Hydraulic bale door release
  • 1 to 2 tons per hour throughput
  • Through door and side tie-off
  • Start-up alarm
  • Control panel equipped with electrical disconnect switch

Optional Features

  • Photocell control
  • Bale made alarm
  • Chute feed hopper
  • Above-ground or pit-style conveyor
Questions? Contact H-West Equipment at (714) 289-7733 Today!
Maren logo

Maren Closed Door Balers

H-West Equipment, Inc. is proud to be an authorized sales & service provider of the following models. Our knowledgeable and experienced staff will be able to answer any questions, discuss financing options, and consult with you on how these products may be able to meet the needs of your facility. Contact us today at (714) 289-7733, or fill the contact form to the right, and one of our equipment specialists will be happy to provide you with excellent service right away.

Maren ProPAK 60 Full Eject

Maren propak-60
  • Largest hopper opening of its class
  • Highest ram face pressure of its class
  • Most durable baler of its class
  • Exclusive Smart Bale Technology

Take the guesswork out of your baling operation with Maren’s ProPAK60 Full Eject Baler with exclusive Smart Bale Technology. Not only can it intelligently customize bale size and weight to meet your shipping methods; it can communicate directly to your production personnel with up-to-the- minute notifications on throughput, jams, productivity and even keep track of its own maintenance schedule… it’s nothing less than the smartest of its class!

Questions? Contact H-West Equipment at (714) 289-7733 Today!

Maren 14 Sawdust/Paper Dust Baler

maren-14

The Model 14 is capable of baling from 3,000 to 4,000 pounds of material per hour. It is designed for use in lumber mills, saw mills and millwork plants, but exerts enough pressure to form extremely dense bales of paper, textile materials, paper dust and a wide variety of other materials.

Installation of the Maren Model 14 is easy. No pit or special foundation of any kind is required. Unit is shipped with oil in hydraulic reservoir and is pre-wired ready for operation. Just move it in, connect control panel to power and start baling.

Questions? Contact H-West Equipment at (714) 289-7733 Today!

Maren 423 Legacy Baler

maren-423-legacy-series
  • Extra Large Hopper Opening Makes it Versatile
  • Small Size Saves Valuable Floor Space
  • Operates while Unattended with Full Bale Buzzer
  • Features Automatic Bale Ejection for Operator Safety

Floor Space … use less – make more!

The Model 423 has an extra large feeder hopper that can be adapted to gravity, pneumatic or belt conveyor automatic feed devices.

 

Fully automatic baling cycle with start-compress-and-stop action, requiring only a part-time operator to tie-off bale and open ejector door. Bale automatically gets ejected as new bale is being formed. Saves space and money.

With all the operating features of larger more expensive balers, the Model 423 is the most efficient automatic baler of its kind!

Questions? Contact H-West Equipment at (714) 289-7733 Today!

Maren 72 Automatic Baler

Maren 72

Maren model 72 Automatic Baler solves scrap handling problems efficiently and economically. For over the past 45 years, hundreds of Maren 72 Automatic Closed Door Manual Tie Balers have been installed across North America and beyond.

The Maren 72 Automatic Baler produces “Mill Size” bales generating maximum revenue for your recycled product and a quick return on investment.

The Maren 72 automatic baler can bale a wide range of waste materials including paper trim, light foil, corrugated set-up box’s, shredded paper. The baler is also offered with an oversize feed hopper and shear knife.

Maren 72 automatic balers can be used in conjunction with pneumatic conveying systems, belt conveyors or feed chutes

A photo-electric eye in the hopper controls the baling operation. When the light beam is Blocked by material, the baling cycle automatically starts and continues until the light beam is no longer blocked. The baler will not operate unless the hopper is filled. A buzzer sounds to alert the operator that the bale is complete. An operator is only needed to release the door, tie off and handle the bale—a part time job.

TECHNICAL FEATURES

  • Automatic Cycle Operation
  • Various Bale Cross Sections & In-Feed hoppers sizes available
  • Hydraulic Safety Door Check
  • Manufactured with name brand Components
  • Built to ANSI & OSHA standards
  • Electrical system is “UL” certified

WIDE RANGE OF OPTIONS AVAILABLE

  • Rotary Pre Compression Door
  • High-Capacity Oil Cooling
  • Automatic Water Mister
  • Extra Long Bale Dogs
  • Wide Mouth Shear Balers
Questions? Contact H-West Equipment at (714) 289-7733 Today!

Maren 122 High-Density Automatic Baler

Maren 122

Maren model 122 High Density Automatic Balers are the first designed specifically for baling of Chipboard, Boxboard, Folding Cartons and Waxed or Coated materials.

The Maren 122 Automatic Baler produces “Mill Size” bales generating maximum revenue for your recycled product and a quick return on investment.

The vault-type discharge door and heavy-duty locking mechanism will easily withstand the forces generated by baling – up to 96,000 pounds of thrust – without warping or torquing. All moving parts are completely enclosed for safe operation.

Maren 122 High-Density automatic balers can be used in conjunction with pneumatic conveying systems, belt conveyors or feed chutes a photo-electric eye in the hopper controls the baling operation. When the light beam is blocked by material, the baling cycle automatically starts and continues until the light beam is no longer blocked. The baler will not operate unless the hopper is filled. A buzzer sounds to alert the operator that the bale is complete. An operator is only needed to release the door, tie off and handle the bale—a part time job.

TECHNICAL FEATURES

  • Automatic Cycle Operation
  • Various Bale Cross Sections & In-Feed hoppers sizes available
  • Hydraulic Safety Door Check
  • Manufactured with name brand Components
  • Built to ANSI & OSHA standards
  • Electrical system is “UL” certified

WIDE RANGE OF OPTIONS AVAILABLE

  • Increased Thrust Package
  • High-Capacity Oil Cooling
  • Automatic Water Mister
  • Bale Run out Conveyor
Questions? Contact H-West Equipment at (714) 289-7733 Today!