BlokPak 3000 & M-Series WP
Marathon Equipment



• The BlokPak® 3000 is capable of processing up to 90 tons per hour (continuous). It fits nicely into existing transfer station facilities or for new construction with minimal site preparation.
• The BlokPak® 3000 can be installed in existing over-the-top transfer station facilities. At these facilities, the compactor is fed with a front-end loader off of a tipping floor. It can also be configured for conveyor feed or direct dump applications.
• The refuse is fed into the large 100″L x 86″W x 91″ clear top (feed) opening. The packing ram compresses the waste into the compaction chamber against a vertical steel gate. The gate remains closed while the ram is cycling forming a dense log of refuse. When the desired log length has been reached, the vertical gate raises and the ram pushes the log into the transfer trailer.
• Once the trailer has reached maximum payload, the trailer is replaced with an empty trailer. The ram penetrates into the trailer 60″ (5 ft.). This is assures a clean break-a-way when the trailer is full. Since the gate is closed, the BlokPak® 3000 can continue to cycle and process waste while the trailer is being replaced to ensure quick turnaround times.


Marathon M-Series Compactors are built tough for the high demands of transfer stations or heavy industrial applications. These compactors can be mounted on a stand to compact directly into the transfer trailer. Extended snouts can also be added to aid in clean break-a-ways. The RAWHIDE™ is a special option that can be applied to the M-Series 1475 Compactor. It has a 48″ ram penetration that is especially beneficial for packing out transfer trailers for a clean break-a-way.

Contact H-West Equipment Today

H. West Equipment, Inc.

645 N. Main Street Orange, CA 92868-1103


Business Hours

Mon-Friday: 8am-5pm
Emergency Service Available